78-87 El Camino Parts

In the past, the only way to repair the floor section under your rear seat was to make patch panels from scratch. Finally, direct weld-in replacement are available to properly restore rust and damage.

Exact fit reproduction bezel fits on the driver's side interior lower door panel for cars equipped with the remote mirror adjuster for the passenger side door mirror.

After many, many requests, we are finally reproducing these Radiator Isolation Bushings. Sold in pairs, the 1978-1988 radiator isolation bushings are the rubber cushions that fit between the top and bottom of the radiator and the core support. 2 pairs required per car.

1978-1988 Bucket seat outer belt sleeves (pair). These are the plastic trim pieces on the floor that the outboard seatbelts come through.

This injection molded ABS plastic front lower kick panel set is designed to mount a pair of 5-1/4" speakers in place of your factory kick panels.

This reproduction cable attaches the heater control in the dash to the pivot point for the blend door on top of the heater box. The clip where it attaches to the heater box typically breaks making your temperature control inoperable. Fits 1978-1988 Monte Carlo, El Camino & Malibu.

1978-1988 Monte Carlo, El Camino, Malibu, Cutlass, Grand Prix, and Regal black ABS plastic lower kick panel set for non-computer controlled cars (no provision for computer in the passenger side panel).

Top quality reproduction hood latch safety catch. Fits all 1978-1988 Monte Carlo, El Camino & Malibu, as well as other G-Body cars.

1978-1988 Monte Carlo, El Camino & Malibu oversized front console change tray. The inside measures 5-1/2" wide and 9" deep. It's approximately twice as big as the factory tray for more practical storage.

Replace your worn, corroded and non-functioning switches with this all-in-one package which includes the often rusted switch retainers.