Shop Now
Choose your car to shop for parts & accessories

The factory license plate pocket is very prone to becoming brittle and breaking. Our new durable ABS plastic replacements are a direct fit and will far out last the GM part. Comes raw black and ready for paint.

Upgrade your stock dim 80's headlamps with our newest headlamp conversion kit that utilizes replaceable LED bulbs. Having tested many LED bulbs in the past, we have found that these provide far greater visibility at a cost that does not break the bank.

Rust Trap is a high gloss, moisture cured, urethane coating for restoring and protecting rusty metal. Perfect for floor, body and frame repair.

Replace your broken or unwanted seatbelt release mechanisms and clean up your door jamb with Dixie's block off plate kit. If you have replaced the stock seatbelts with new modern versions, then you no longer need the factory seatbelt releases located on the door striker posts. The original pieces are often broken and were discontinued by GM long ago. These stainless steel plates can be installed as is, can be polished or painted body color.

1978-1988 Bucket seat outer belt sleeves (pair). These are the plastic trim pieces on the floor that the outboard seatbelts come through.

Project a wider and brighter light for added safety and a custom modern touch. This fits the stock third brake light housing and contains 3 rows of 15 LEDs each (45 total). It also uses less power and generates less heat than the stock #1156 bulb. The LED panel is powered through the factory bulb socket, so no wires are cut and no modifications are needed to the third brake light housing. Limited Lifetime Warranty.

This lamp socket fits on the back of the speedo gauge cluster and holds the cluster lamps/bulb. These often get lost when the cars is apart or the terminals fail due to age causing the indicator bulb to not work.

This ABS plastic front lower kick panel set is designed to mount a pair of 5-1/4" speakers in place of your factory kick panels. Note: There is no provision for a computer in the passenger side kick panel and they may require bending the stock e-brake pedal out slightly for clearance.

Dixie has huge selection of everything you'll need to re-seal your classic car!

The factory end caps take quite a beating from damaging sun rays. They get chaulky and can rarely be salvaged. Our new caps are made from ABS plastic and will far outlast the GM originals.